81 lines
2.2 KiB
YAML
81 lines
2.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NAU8325 audio Amplifier
|
|
|
|
maintainers:
|
|
- Seven Lee <WTLI@nuvoton.com>
|
|
|
|
allOf:
|
|
- $ref: dai-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: nuvoton,nau8325
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
nuvoton,vref-impedance-ohms:
|
|
description:
|
|
The vref impedance to be used in ohms. Middle of voltage enables
|
|
Tie-Off selection options. Due to the high impedance of the VREF
|
|
pin, it is important to use a low-leakage capacitor.
|
|
|
|
enum: [0, 25000, 125000, 2500]
|
|
|
|
nuvoton,dac-vref-microvolt:
|
|
description:
|
|
The DAC vref to be used in voltage. DAC reference voltage setting. Can
|
|
be used for minor tuning of the output level. Since the VDDA is range
|
|
between 1.62 to 1.98 voltage, the typical value for design is 1.8V. After
|
|
the minor tuning, the final microvolt are as the below.
|
|
|
|
enum: [1800000, 2700000, 2880000, 3060000]
|
|
|
|
nuvoton,alc-enable:
|
|
description:
|
|
Enable digital automatic level control (ALC) function.
|
|
type: boolean
|
|
|
|
nuvoton,clock-detection-disable:
|
|
description:
|
|
When clock detection is enabled, it will detect whether MCLK
|
|
and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
|
|
FS range is from 8kHz to 96kHz. And also needs to detect the ratio
|
|
MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
|
|
to make sure data is present. There needs to be at least 8 BCLK
|
|
cycles per Frame Sync.
|
|
type: boolean
|
|
|
|
nuvoton,clock-det-data:
|
|
description:
|
|
Request clock detection to require 2048 non-zero samples before enabling
|
|
the audio paths. If set then non-zero samples is required, otherwise it
|
|
doesn't matter.
|
|
type: boolean
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
codec@21 {
|
|
compatible = "nuvoton,nau8325";
|
|
reg = <0x21>;
|
|
nuvoton,vref-impedance-ohms = <125000>;
|
|
nuvoton,dac-vref-microvolt = <2880000>;
|
|
nuvoton,alc-enable;
|
|
nuvoton,clock-det-data;
|
|
};
|
|
};
|