justuser-31/JustOS
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
28de93f85d
JustOS/linux-6.13/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
justuser 02e73b8cd9 up
2025-01-24 17:00:19 +03:00

1344 lines
30 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8650.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 8
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SM8650 HDK";
compatible = "qcom,sm8650-hdk", "qcom,sm8650";
chassis-type = "embedded";
aliases {
serial0 = &uart15;
serial1 = &uart14;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_out: endpoint {
remote-endpoint = <&lt9611_out>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&volume_up_n>;
pinctrl-names = "default";
key-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_BLUETOOTH;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
panic-indicator;
};
led-2 {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
};
pmic-glink {
compatible = "qcom,sm8650-pmic-glink",
"qcom,sm8550-pmic-glink",
"qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
remote-endpoint = <&usb_dp_qmpphy_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_sbu: endpoint {
remote-endpoint = <&wcd_usbss_sbu_mux>;
};
};
};
};
};
lt9611_1v2: regulator-lt9611-1v2 {
compatible = "regulator-fixed";
regulator-name = "LT9611_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&vph_pwr>;
gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
lt9611_3v3: regulator-lt9611-3v3 {
compatible = "regulator-fixed";
regulator-name = "LT9611_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vreg_bob_3v3>;
gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound {
compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
model = "SM8650-HDK";
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
"SpkrRight IN", "WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC1", "MIC BIAS1",
"AMIC2", "MIC BIAS2",
"AMIC5", "MIC BIAS4",
"TX SWR_INPUT0", "ADC1_OUTPUT",
"TX SWR_INPUT1", "ADC2_OUTPUT",
"TX SWR_INPUT3", "ADC4_OUTPUT";
wcd-playback-dai-link {
link-name = "WCD Playback";
cpu {
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wcd-capture-dai-link {
link-name = "WCD Capture";
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
};
codec {
sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wsa-dai-link {
link-name = "WSA Playback";
cpu {
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
vreg_bob_3v3: regulator-vreg-bob-3v3 {
compatible = "regulator-fixed";
regulator-name = "VREG_BOB_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vph_pwr>;
};
wcd939x: audio-codec {
compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
pinctrl-0 = <&wcd_default>;
pinctrl-names = "default";
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
vdd-buck-supply = <&vreg_l15b_1p8>;
vdd-rxtx-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l15b_1p8>;
vdd-mic-bias-supply = <&vreg_bob1>;
#sound-dai-cells = <1>;
};
wcn7850-pmu {
compatible = "qcom,wcn7850-pmu";
pinctrl-names = "default";
pinctrl-0 = <&wlan_en>, <&bt_default>;
wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
vdd-supply = <&vreg_s4i_0p85>;
vddio-supply = <&vreg_l15b_1p8>;
vddio1p2-supply = <&vreg_l3c_1p2>;
vddaon-supply = <&vreg_s2c_0p8>;
vdddig-supply = <&vreg_s3c_0p9>;
vddrfa1p2-supply = <&vreg_s1c_1p2>;
vddrfa1p8-supply = <&vreg_s6c_1p8>;
clocks = <&rpmhcc RPMH_RF_CLK1>;
regulators {
vreg_pmu_rfa_cmn: ldo0 {
regulator-name = "vreg_pmu_rfa_cmn";
};
vreg_pmu_aon_0p59: ldo1 {
regulator-name = "vreg_pmu_aon_0p59";
};
vreg_pmu_wlcx_0p8: ldo2 {
regulator-name = "vreg_pmu_wlcx_0p8";
};
vreg_pmu_wlmx_0p85: ldo3 {
regulator-name = "vreg_pmu_wlmx_0p85";
};
vreg_pmu_btcmx_0p85: ldo4 {
regulator-name = "vreg_pmu_btcmx_0p85";
};
vreg_pmu_rfa_0p8: ldo5 {
regulator-name = "vreg_pmu_rfa_0p8";
};
vreg_pmu_rfa_1p2: ldo6 {
regulator-name = "vreg_pmu_rfa_1p2";
};
vreg_pmu_rfa_1p8: ldo7 {
regulator-name = "vreg_pmu_rfa_1p8";
};
vreg_pmu_pcie_0p9: ldo8 {
regulator-name = "vreg_pmu_pcie_0p9";
};
vreg_pmu_pcie_1p8: ldo9 {
regulator-name = "vreg_pmu_pcie_1p8";
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
vdd-bob1-supply = <&vph_pwr>;
vdd-bob2-supply = <&vph_pwr>;
vdd-l2-l13-l14-supply = <&vreg_bob1>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-l5-l16-supply = <&vreg_bob1>;
vdd-l6-l7-supply = <&vreg_bob1>;
vdd-l8-l9-supply = <&vreg_bob1>;
vdd-l11-supply = <&vreg_s1c_1p2>;
vdd-l12-supply = <&vreg_s6c_1p8>;
vdd-l15-supply = <&vreg_s6c_1p8>;
vdd-l17-supply = <&vreg_bob2>;
qcom,pmic-id = "b";
vreg_bob1: bob1 {
regulator-name = "vreg_bob1";
regulator-min-microvolt = <3296000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob2: bob2 {
regulator-name = "vreg_bob2";
regulator-min-microvolt = <2720000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p0: ldo2 {
regulator-name = "vreg_l2b_3p0";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5b_3p1: ldo5 {
regulator-name = "vreg_l5b_3p1";
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p8: ldo6 {
regulator-name = "vreg_l6b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_1p8: ldo7 {
regulator-name = "vreg_l7b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_1p8: ldo8 {
regulator-name = "vreg_l8b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_2p9: ldo9 {
regulator-name = "vreg_l9b_2p9";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p2: ldo11 {
regulator-name = "vreg_l11b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_1p8: ldo12 {
regulator-name = "vreg_l12b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_3p0: ldo13 {
regulator-name = "vreg_l13b_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p2: ldo14 {
regulator-name = "vreg_l14b_3p2";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_1p8: ldo15 {
regulator-name = "vreg_l15b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_2p8: ldo16 {
regulator-name = "vreg_l16b_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_2p5: ldo17 {
regulator-name = "vreg_l17b_2p5";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s1c_1p2>;
vdd-l2-supply = <&vreg_s1c_1p2>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
qcom,pmic-id = "c";
vreg_s1c_1p2: smps1 {
regulator-name = "vreg_s1c_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1348000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s2c_0p8: smps2 {
regulator-name = "vreg_s2c_0p8";
regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1036000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s3c_0p9: smps3 {
regulator-name = "vreg_s3c_0p9";
regulator-min-microvolt = <976000>;
regulator-max-microvolt = <1064000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s4c_1p2: smps4 {
regulator-name = "vreg_s4c_1p2";
regulator-min-microvolt = <1224000>;
regulator-max-microvolt = <1280000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5c_0p7: smps5 {
regulator-name = "vreg_s5c_0p7";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6c_1p8: smps6 {
regulator-name = "vreg_s6c_1p8";
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p2: ldo1 {
regulator-name = "vreg_l1c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_1p2: ldo3 {
regulator-name = "vreg_l3c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "d";
vreg_l1d_0p88: ldo1 {
regulator-name = "vreg_l1d_0p88";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l3-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "e";
vreg_l3e_0p9: ldo3 {
regulator-name = "vreg_l3e_0p9";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
vdd-l3-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "g";
vreg_l1g_0p91: ldo1 {
regulator-name = "vreg_l1g_0p91";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3g_0p91: ldo3 {
regulator-name = "vreg_l3g_0p91";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-5 {
compatible = "qcom,pm8550ve-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
vdd-l2-supply = <&vreg_s3c_0p9>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-s4-supply = <&vph_pwr>;
qcom,pmic-id = "i";
vreg_s4i_0p85: smps4 {
regulator-name = "vreg_s4i_0p85";
regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1004000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1i_0p88: ldo1 {
regulator-name = "vreg_l1i_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2i_0p88: ldo2 {
regulator-name = "vreg_l2i_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3i_1p2: ldo3 {
regulator-name = "vreg_l3i_0p91";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-6 {
compatible = "qcom,pm8010-rpmh-regulators";
qcom,pmic-id = "m";
vdd-l1-l2-supply = <&vreg_s1c_1p2>;
vdd-l3-l4-supply = <&vreg_bob2>;
vdd-l5-supply = <&vreg_s6c_1p8>;
vdd-l6-supply = <&vreg_bob1>;
vdd-l7-supply = <&vreg_bob1>;
vreg_l1m_1p1: ldo1 {
regulator-name = "vreg_l1m_1p1";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2m_1p056: ldo2 {
regulator-name = "vreg_l2m_1p056";
regulator-min-microvolt = <1056000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3m_2p8: ldo3 {
regulator-name = "vreg_l3m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4m_2p8: ldo4 {
regulator-name = "vreg_l4m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5m_1p8: ldo5 {
regulator-name = "vreg_l5m_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6m_2p8: ldo6 {
regulator-name = "vreg_l6m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7m_2p96: ldo7 {
regulator-name = "vreg_l7m_2p96";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-7 {
compatible = "qcom,pm8010-rpmh-regulators";
qcom,pmic-id = "n";
vdd-l1-l2-supply = <&vreg_s1c_1p2>;
vdd-l3-l4-supply = <&vreg_s6c_1p8>;
vdd-l5-supply = <&vreg_bob2>;
vdd-l6-supply = <&vreg_bob2>;
vdd-l7-supply = <&vreg_bob1>;
vreg_l1n_1p1: ldo1 {
regulator-name = "vreg_l1n_1p1";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2n_1p056: ldo2 {
regulator-name = "vreg_l2n_1p056";
regulator-min-microvolt = <1056000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3n_1p8: ldo3 {
regulator-name = "vreg_l3n_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4n_1p8: ldo4 {
regulator-name = "vreg_l4n_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5n_2p8: ldo5 {
regulator-name = "vreg_l5n_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6n_2p8: ldo6 {
regulator-name = "vreg_l6n_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7n_3p3: ldo7 {
regulator-name = "vreg_l7n_3p3";
regulator-min-microvolt = <3304000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&gpi_dma1 {
status = "okay";
};
&i2c3 {
status = "okay";
wcd_usbss: typec-mux@e {
compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
reg = <0xe>;
vdd-supply = <&vreg_l15b_1p8>;
reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
mode-switch;
orientation-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
wcd_usbss_sbu_mux: endpoint {
remote-endpoint = <&pmic_glink_sbu>;
};
};
};
};
};
&i2c6 {
clock-frequency = <400000>;
status = "okay";
lt9611_codec: hdmi-bridge@2b {
compatible = "lontium,lt9611uxc";
reg = <0x2b>;
interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
vdd-supply = <&lt9611_1v2>;
vcc-supply = <&lt9611_3v3>;
pinctrl-0 = <&lt9611_irq_pin>, <&lt9611_rst_pin>;
pinctrl-names = "default";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lt9611_a: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
port@2 {
reg = <2>;
lt9611_out: endpoint {
remote-endpoint = <&hdmi_connector_out>;
};
};
};
};
};
&ipa {
qcom,gsi-loader = "self";
memory-region = <&ipa_fw_mem>;
firmware-name = "qcom/sm8650/ipa_fws.mbn";
status = "okay";
};
&gpu {
status = "okay";
zap-shader {
firmware-name = "qcom/sm8650/gen70900_zap.mbn";
};
};
&lpass_tlmm {
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio21";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
vdda-supply = <&vreg_l3i_1p2>;
status = "okay";
};
&mdss_dsi0_out {
remote-endpoint = <&lt9611_a>;
data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
vdds-supply = <&vreg_l1i_0p88>;
status = "okay";
};
&mdss_dp0 {
status = "okay";
};
&mdss_dp0_out {
data-lanes = <0 1>;
};
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
status = "okay";
};
&pcieport0 {
wifi@0 {
compatible = "pci17cb,1107";
reg = <0x10000 0x0 0x0 0x0 0x0>;
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
};
};
&pcie0_phy {
vdda-phy-supply = <&vreg_l1i_0p88>;
vdda-pll-supply = <&vreg_l3i_1p2>;
status = "okay";
};
&pcie1 {
wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_default_state>;
pinctrl-names = "default";
status = "okay";
};
&pcie1_phy {
vdda-phy-supply = <&vreg_l3e_0p9>;
vdda-pll-supply = <&vreg_l3i_1p2>;
vdda-qref-supply = <&vreg_l1i_0p88>;
status = "okay";
};
&pm8550_gpios {
sdc2_card_det_n: sdc2-card-det-state {
pins = "gpio12";
function = "normal";
bias-pull-up;
input-enable;
output-disable;
power-source = <1>; /* 1.8 V */
};
volume_up_n: volume-up-n-state {
pins = "gpio6";
function = "normal";
bias-pull-up;
input-enable;
power-source = <1>;
};
};
/* The RGB signals are routed to 3 separate LEDs on the HDK8650 */
&pm8550_pwm {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
led@1 {
reg = <1>;
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
default-state = "off";
};
led@2 {
reg = <2>;
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
};
led@3 {
reg = <3>;
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
default-state = "off";
};
};
&pm8550b_eusb2_repeater {
vdd18-supply = <&vreg_l15b_1p8>;
vdd3-supply = <&vreg_l5b_3p1>;
};
&pmk8550_rtc {
status = "okay";
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&qup_i2c3_data_clk {
/* Use internal I2C pull-up */
bias-pull-up = <2200>;
};
&qupv3_id_0 {
iommus = <&apps_smmu 0xa3 0x3>;
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sm8650/adsp.mbn",
"qcom/sm8650/adsp_dtb.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/sm8650/cdsp.mbn",
"qcom/sm8650/cdsp_dtb.mbn";
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/sm8650/modem.mbn",
"qcom/sm8650/modem_dtb.mbn";
status = "okay";
};
&sdhc_2 {
cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&vreg_l9b_2p9>;
vqmmc-supply = <&vreg_l8b_1p8>;
bus-width = <4>;
no-sdio;
no-mmc;
pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
pinctrl-names = "default", "sleep";
status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
&swr0 {
status = "okay";
/* WSA8845, Speaker North */
north_spkr: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
pinctrl-0 = <&spkr_1_sd_n_active>;
pinctrl-names = "default";
powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l3c_1p2>;
/*
* WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
* WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
*/
qcom,port-mapping = <1 2 3 7 10 13>;
};
/* WSA8845, Speaker South */
south_spkr: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
pinctrl-0 = <&spkr_2_sd_n_active>;
pinctrl-names = "default";
powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l3c_1p2>;
/*
* WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
* WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
*/
qcom,port-mapping = <4 5 6 7 11 13>;
};
};
&swr1 {
status = "okay";
/* WCD9395 RX */
wcd_rx: codec@0,4 {
compatible = "sdw20217010e00";
reg = <0 4>;
/*
* WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
* WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
* WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
* WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
* WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
* WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
*/
qcom,rx-port-mapping = <1 2 3 4 5 9>;
};
};
&swr2 {
status = "okay";
/* WCD9395 TX */
wcd_tx: codec@0,3 {
compatible = "sdw20217010e00";
reg = <0 3>;
/*
* WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
* WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
* WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
* WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
*/
qcom,tx-port-mapping = <2 2 3 4>;
};
};
&tlmm {
/* Reserved I/Os for NFC */
gpio-reserved-ranges = <32 8>, <74 1>;
bt_default: bt-default-state {
bt-en-pins {
pins = "gpio17";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
sw-ctrl-pins {
pins = "gpio18";
function = "gpio";
bias-pull-down;
};
};
lt9611_irq_pin: lt9611-irq-state {
pins = "gpio85";
function = "gpio";
bias-disable;
};
lt9611_rst_pin: lt9611-rst-state {
pins = "gpio28";
function = "gpio";
output-high;
};
spkr_2_sd_n_active: spkr-2-sd-n-active-state {
pins = "gpio77";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
wcd_default: wcd-reset-n-active-state {
pins = "gpio107";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
wlan_en: wlan-en-state {
pins = "gpio16";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
&uart14 {
status = "okay";
bluetooth {
compatible = "qcom,wcn7850-bt";
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
max-speed = <3200000>;
};
};
&uart15 {
status = "okay";
};
&ufs_mem_hc {
reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17b_2p5>;
vcc-max-microamp = <1300000>;
vccq-supply = <&vreg_l1c_1p2>;
vccq-max-microamp = <1200000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l1d_0p88>;
vdda-pll-supply = <&vreg_l3i_1p2>;
status = "okay";
};
/*
* DPAUX -> WCD9395 -> USB_SBU -> USB-C
* eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
* USB SS -> USB-C
*/
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_hsphy {
vdd-supply = <&vreg_l1i_0p88>;
vdda12-supply = <&vreg_l3i_1p2>;
phys = <&pm8550b_eusb2_repeater>;
status = "okay";
};
&usb_dp_qmpphy {
vdda-phy-supply = <&vreg_l3i_1p2>;
vdda-pll-supply = <&vreg_l3g_0p91>;
status = "okay";
};
&usb_dp_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
&xo_board {
clock-frequency = <76800000>;
};
Reference in New Issue View Git Blame Copy Permalink