94 lines
2.1 KiB
YAML
94 lines
2.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/raspberrypi,rp1-cfe.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Raspberry Pi PiSP Camera Front End
|
|
|
|
maintainers:
|
|
- Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
- Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
|
|
|
|
description: |
|
|
The Raspberry Pi PiSP Camera Front End is a module in Raspberrypi 5's RP1 I/O
|
|
controller, that contains:
|
|
- MIPI D-PHY
|
|
- MIPI CSI-2 receiver
|
|
- Simple image processor (called PiSP Front End, or FE)
|
|
|
|
The FE documentation is available at:
|
|
https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
|
|
|
|
The PHY and CSI-2 receiver part have no public documentation.
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- const: raspberrypi,rp1-cfe
|
|
|
|
reg:
|
|
items:
|
|
- description: CSI-2 registers
|
|
- description: D-PHY registers
|
|
- description: MIPI CFG (a simple top-level mux) registers
|
|
- description: FE registers
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
description: CSI-2 RX Port
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
minItems: 1
|
|
maxItems: 4
|
|
|
|
required:
|
|
- data-lanes
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
rp1 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
csi@110000 {
|
|
compatible = "raspberrypi,rp1-cfe";
|
|
reg = <0xc0 0x40110000 0x0 0x100>,
|
|
<0xc0 0x40114000 0x0 0x100>,
|
|
<0xc0 0x40120000 0x0 0x100>,
|
|
<0xc0 0x40124000 0x0 0x1000>;
|
|
|
|
interrupts = <42>;
|
|
|
|
clocks = <&rp1_clocks>;
|
|
|
|
port {
|
|
csi_ep: endpoint {
|
|
remote-endpoint = <&cam_endpoint>;
|
|
data-lanes = <1 2>;
|
|
};
|
|
};
|
|
};
|
|
};
|