492 lines
9.1 KiB
Plaintext
492 lines
9.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2024, Linaro Ltd.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "msm8916-pm8916.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
|
#include <dt-bindings/sound/apq8016-lpass.h>
|
|
|
|
/ {
|
|
model = "Schneider Electric HMIBSC Board";
|
|
compatible = "schneider,apq8016-hmibsc", "qcom,apq8016";
|
|
|
|
aliases {
|
|
i2c1 = &blsp_i2c6;
|
|
i2c3 = &blsp_i2c4;
|
|
i2c4 = &blsp_i2c3;
|
|
mmc0 = &sdhc_1; /* eMMC */
|
|
mmc1 = &sdhc_2; /* SD card */
|
|
serial0 = &blsp_uart1;
|
|
serial1 = &blsp_uart2;
|
|
spi0 = &blsp_spi5;
|
|
usid0 = &pm8916_0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
hdmi-out {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con: endpoint {
|
|
remote-endpoint = <&adv7533_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-0 = <&msm_key_volp_n_default>;
|
|
pinctrl-names = "default";
|
|
|
|
button {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&pm8916_mpps_leds>;
|
|
pinctrl-names = "default";
|
|
|
|
led-1 {
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_YELLOW>;
|
|
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0tx";
|
|
default-state = "off";
|
|
};
|
|
|
|
led-2 {
|
|
function = LED_FUNCTION_BLUETOOTH;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "bluetooth-power";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0 0x80000000 0 0x40000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
ramoops@bff00000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0xbff00000 0x0 0x100000>;
|
|
record-size = <0x20000>;
|
|
console-size = <0x20000>;
|
|
ftrace-size = <0x20000>;
|
|
ecc-size = <16>;
|
|
};
|
|
};
|
|
|
|
usb-hub {
|
|
compatible = "smsc,usb3503";
|
|
reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>;
|
|
initial-mode = <1>;
|
|
};
|
|
|
|
usb_id: usb-id {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&usb_id_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
&blsp_i2c3 {
|
|
status = "okay";
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c32";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&blsp_i2c4 {
|
|
status = "okay";
|
|
|
|
adv_bridge: bridge@39 {
|
|
compatible = "adi,adv7533";
|
|
reg = <0x39>;
|
|
interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
adi,dsi-lanes = <4>;
|
|
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
|
|
clock-names = "cec";
|
|
pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
|
|
|
avdd-supply = <&pm8916_l6>;
|
|
a2vdd-supply = <&pm8916_l6>;
|
|
dvdd-supply = <&pm8916_l6>;
|
|
pvdd-supply = <&pm8916_l6>;
|
|
v1p2-supply = <&pm8916_l6>;
|
|
v3p3-supply = <&pm8916_l17>;
|
|
|
|
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
|
|
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
|
|
pinctrl-names = "default","sleep";
|
|
#sound-dai-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
adv7533_in: endpoint {
|
|
remote-endpoint = <&mdss_dsi0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
adv7533_out: endpoint {
|
|
remote-endpoint = <&hdmi_con>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_i2c6 {
|
|
status = "okay";
|
|
|
|
rtc@30 {
|
|
compatible = "sii,s35390a";
|
|
reg = <0x30>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c256";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&blsp_spi5 {
|
|
cs-gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
tpm@0 {
|
|
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
|
|
reg = <0>;
|
|
spi-max-frequency = <500000>;
|
|
};
|
|
};
|
|
|
|
&blsp_uart1 {
|
|
label = "UART0";
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp_uart2 {
|
|
label = "UART1";
|
|
status = "okay";
|
|
};
|
|
|
|
&lpass {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dsi0_out {
|
|
data-lanes = <0 1 2 3>;
|
|
remote-endpoint = <&adv7533_in>;
|
|
};
|
|
|
|
&pm8916_codec {
|
|
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
|
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_gpios {
|
|
gpio-line-names =
|
|
"USB_HUB_RESET_N_PM",
|
|
"USB_SW_SEL_PM",
|
|
"NC",
|
|
"NC";
|
|
|
|
usb_hub_reset_pm: usb-hub-reset-pm-state {
|
|
pins = "gpio1";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
input-disable;
|
|
output-high;
|
|
};
|
|
|
|
usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
|
|
pins = "gpio1";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
input-disable;
|
|
output-low;
|
|
};
|
|
|
|
usb_sw_sel_pm: usb-sw-sel-pm-state {
|
|
pins = "gpio2";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
power-source = <PM8916_GPIO_VPH>;
|
|
input-disable;
|
|
output-high;
|
|
};
|
|
|
|
usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
|
|
pins = "gpio2";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
power-source = <PM8916_GPIO_VPH>;
|
|
input-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
&pm8916_mpps {
|
|
gpio-line-names =
|
|
"NC",
|
|
"WLAN_LED_CTRL",
|
|
"BT_LED_CTRL",
|
|
"NC";
|
|
|
|
pm8916_mpps_leds: pm8916-mpps-state {
|
|
pins = "mpp2", "mpp3";
|
|
function = "digital";
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
&pm8916_resin {
|
|
linux,code = <KEY_POWER>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_rpm_regulators {
|
|
pm8916_l17: l17 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
|
|
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
|
|
pinctrl-names = "default", "sleep";
|
|
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sound {
|
|
pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
|
|
pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
model = "HMIBSC";
|
|
audio-routing =
|
|
"AMIC2", "MIC BIAS Internal2",
|
|
"AMIC3", "MIC BIAS External1";
|
|
status = "okay";
|
|
|
|
quaternary-dai-link {
|
|
link-name = "ADV7533";
|
|
cpu {
|
|
sound-dai = <&lpass MI2S_QUATERNARY>;
|
|
};
|
|
codec {
|
|
sound-dai = <&adv_bridge 0>;
|
|
};
|
|
};
|
|
|
|
primary-dai-link {
|
|
link-name = "WCD";
|
|
cpu {
|
|
sound-dai = <&lpass MI2S_PRIMARY>;
|
|
};
|
|
codec {
|
|
sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
|
|
};
|
|
};
|
|
|
|
tertiary-dai-link {
|
|
link-name = "WCD-Capture";
|
|
cpu {
|
|
sound-dai = <&lpass MI2S_TERTIARY>;
|
|
};
|
|
codec {
|
|
sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
pinctrl-0 = <&uart1_mux0_rs232_high &uart1_mux1_rs232_low>;
|
|
pinctrl-names = "default";
|
|
|
|
adv7533_int_active: adv533-int-active-state {
|
|
pins = "gpio31";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
adv7533_int_suspend: adv7533-int-suspend-state {
|
|
pins = "gpio31";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
adv7533_switch_active: adv7533-switch-active-state {
|
|
pins = "gpio32";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
adv7533_switch_suspend: adv7533-switch-suspend-state {
|
|
pins = "gpio32";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
msm_key_volp_n_default: msm-key-volp-n-default-state {
|
|
pins = "gpio107";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
sdc2_cd_default: sdc2-cd-default-state {
|
|
pins = "gpio38";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
/*
|
|
* UART1 being the debug console supports various modes of
|
|
* operation (RS-232/485/422) controlled via GPIOs configured
|
|
* mux as follows:
|
|
*
|
|
* gpio100 gpio99 UART mode
|
|
* 0 0 loopback
|
|
* 0 1 RS-232
|
|
* 1 0 RS-485
|
|
* 1 1 RS-422
|
|
*
|
|
* The default mode configured here is RS-232 mode.
|
|
*/
|
|
uart1_mux0_rs232_high: uart1-mux0-rs232-state {
|
|
bootph-all;
|
|
pins = "gpio99";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
|
|
uart1_mux1_rs232_low: uart1-mux1-rs232-state {
|
|
bootph-all;
|
|
pins = "gpio100";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
|
|
usb_id_default: usb-id-default-state {
|
|
pins = "gpio110";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&usb {
|
|
extcon = <&usb_id>, <&usb_id>;
|
|
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
|
|
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
|
|
pinctrl-names = "default", "device";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_hs_phy {
|
|
extcon = <&usb_id>;
|
|
};
|
|
|
|
&wcnss {
|
|
firmware-name = "qcom/apq8016/wcnss.mbn";
|
|
status = "okay";
|
|
};
|
|
|
|
&wcnss_ctrl {
|
|
firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
|
|
};
|
|
|
|
&wcnss_iris {
|
|
compatible = "qcom,wcn3620";
|
|
};
|
|
|
|
&wcnss_mem {
|
|
status = "okay";
|
|
};
|
|
|
|
/* PINCTRL - additions to nodes defined in msm8916.dtsi */
|
|
|
|
/*
|
|
* 2mA drive strength is not enough when connecting multiple
|
|
* I2C devices with different pull up resistors.
|
|
*/
|
|
&blsp_i2c4_default {
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
&blsp_i2c6_default {
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
&blsp_uart1_default {
|
|
bootph-all;
|
|
};
|
|
|
|
/* Enable CoreSight */
|
|
&cti0 { status = "okay"; };
|
|
&cti1 { status = "okay"; };
|
|
&cti12 { status = "okay"; };
|
|
&cti13 { status = "okay"; };
|
|
&cti14 { status = "okay"; };
|
|
&cti15 { status = "okay"; };
|
|
&debug0 { status = "okay"; };
|
|
&debug1 { status = "okay"; };
|
|
&debug2 { status = "okay"; };
|
|
&debug3 { status = "okay"; };
|
|
&etf { status = "okay"; };
|
|
&etm0 { status = "okay"; };
|
|
&etm1 { status = "okay"; };
|
|
&etm2 { status = "okay"; };
|
|
&etm3 { status = "okay"; };
|
|
&etr { status = "okay"; };
|
|
&funnel0 { status = "okay"; };
|
|
&funnel1 { status = "okay"; };
|
|
&replicator { status = "okay"; };
|
|
&stm { status = "okay"; };
|
|
&tpiu { status = "okay"; };
|