751 lines
15 KiB
Plaintext
751 lines
15 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
/*
|
||
|
|
* Device tree definitions for the Turing RK1 SoM.
|
||
|
|
*
|
||
|
|
* Copyright (c) 2023 Sam Edwards <CFSworks@gmail.com>
|
||
|
|
*
|
||
|
|
* Based on RK3588-EVB1 devicetree
|
||
|
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
||
|
|
#include "rk3588.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
compatible = "turing,rk1", "rockchip,rk3588";
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
ethernet0 = &gmac1;
|
||
|
|
mmc0 = &sdhci;
|
||
|
|
};
|
||
|
|
|
||
|
|
fan: pwm-fan {
|
||
|
|
compatible = "pwm-fan";
|
||
|
|
cooling-levels = <0 25 95 145 195 255>;
|
||
|
|
fan-supply = <&vcc5v0_sys>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pwm0m2_pins &fan_int>;
|
||
|
|
interrupt-parent = <&gpio0>;
|
||
|
|
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
pwms = <&pwm0 0 50000 0>;
|
||
|
|
#cooling-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vcc3v3_pcie30";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
enable-active-high;
|
||
|
|
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&vcc3v3_pcie30_en>;
|
||
|
|
startup-delay-us = <5000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc5v0_sys: regulator-vcc5v0-sys {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vcc5v0_sys";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
vin-supply = <&vcc5v0_sys>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&combphy2_psu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_b0 {
|
||
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_b1 {
|
||
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_b2 {
|
||
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_b3 {
|
||
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_l0 {
|
||
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_l1 {
|
||
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_l2 {
|
||
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_l3 {
|
||
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gmac1 {
|
||
|
|
clock_in_out = "output";
|
||
|
|
phy-handle = <&rgmii_phy>;
|
||
|
|
phy-mode = "rgmii-rxid";
|
||
|
|
pinctrl-0 = <&gmac1_miim
|
||
|
|
&gmac1_tx_bus2
|
||
|
|
&gmac1_rx_bus2
|
||
|
|
&gmac1_rgmii_clk
|
||
|
|
&gmac1_rgmii_bus>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
rx_delay = <0x00>;
|
||
|
|
tx_delay = <0x43>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpu {
|
||
|
|
mali-supply = <&vdd_gpu_s0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c0 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdd_cpu_big0_s0: regulator@42 {
|
||
|
|
compatible = "rockchip,rk8602";
|
||
|
|
reg = <0x42>;
|
||
|
|
fcs,suspend-voltage-selector = <1>;
|
||
|
|
regulator-name = "vdd_cpu_big0_s0";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <550000>;
|
||
|
|
regulator-max-microvolt = <1050000>;
|
||
|
|
regulator-ramp-delay = <2300>;
|
||
|
|
vin-supply = <&vcc5v0_sys>;
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_cpu_big1_s0: regulator@43 {
|
||
|
|
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||
|
|
reg = <0x43>;
|
||
|
|
fcs,suspend-voltage-selector = <1>;
|
||
|
|
regulator-name = "vdd_cpu_big1_s0";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <550000>;
|
||
|
|
regulator-max-microvolt = <1050000>;
|
||
|
|
regulator-ramp-delay = <2300>;
|
||
|
|
vin-supply = <&vcc5v0_sys>;
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c1m2_xfer>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdd_npu_s0: regulator@42 {
|
||
|
|
compatible = "rockchip,rk8602";
|
||
|
|
reg = <0x42>;
|
||
|
|
fcs,suspend-voltage-selector = <1>;
|
||
|
|
regulator-name = "vdd_npu_s0";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <550000>;
|
||
|
|
regulator-max-microvolt = <950000>;
|
||
|
|
regulator-ramp-delay = <2300>;
|
||
|
|
vin-supply = <&vcc5v0_sys>;
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c6 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
hym8563: rtc@51 {
|
||
|
|
compatible = "haoyu,hym8563";
|
||
|
|
reg = <0x51>;
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-output-names = "hym8563";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&hym8563_int>;
|
||
|
|
interrupt-parent = <&gpio0>;
|
||
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
wakeup-source;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdio1 {
|
||
|
|
rgmii_phy: ethernet-phy@1 {
|
||
|
|
/* RTL8211F */
|
||
|
|
compatible = "ethernet-phy-id001c.c916";
|
||
|
|
reg = <0x1>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&rtl8211f_rst>;
|
||
|
|
reset-assert-us = <15000>;
|
||
|
|
reset-deassert-us = <50000>;
|
||
|
|
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&package_thermal {
|
||
|
|
trips {
|
||
|
|
package_active1: trip-active1 {
|
||
|
|
temperature = <45000>;
|
||
|
|
hysteresis = <5000>;
|
||
|
|
type = "active";
|
||
|
|
};
|
||
|
|
package_active2: trip-active2 {
|
||
|
|
temperature = <50000>;
|
||
|
|
hysteresis = <5000>;
|
||
|
|
type = "active";
|
||
|
|
};
|
||
|
|
package_active3: trip-active3 {
|
||
|
|
temperature = <60000>;
|
||
|
|
hysteresis = <5000>;
|
||
|
|
type = "active";
|
||
|
|
};
|
||
|
|
package_active4: trip-active4 {
|
||
|
|
temperature = <70000>;
|
||
|
|
hysteresis = <5000>;
|
||
|
|
type = "active";
|
||
|
|
};
|
||
|
|
package_active5: trip-active5 {
|
||
|
|
temperature = <80000>;
|
||
|
|
hysteresis = <5000>;
|
||
|
|
type = "active";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
cooling-maps {
|
||
|
|
map1 {
|
||
|
|
trip = <&package_active1>;
|
||
|
|
cooling-device = <&fan 1 1>;
|
||
|
|
};
|
||
|
|
map2 {
|
||
|
|
trip = <&package_active2>;
|
||
|
|
cooling-device = <&fan 2 2>;
|
||
|
|
};
|
||
|
|
map3 {
|
||
|
|
trip = <&package_active3>;
|
||
|
|
cooling-device = <&fan 3 3>;
|
||
|
|
};
|
||
|
|
map4 {
|
||
|
|
trip = <&package_active4>;
|
||
|
|
cooling-device = <&fan 4 4>;
|
||
|
|
};
|
||
|
|
map5 {
|
||
|
|
trip = <&package_active5>;
|
||
|
|
cooling-device = <&fan 5 5>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie2x1l1 {
|
||
|
|
linux,pci-domain = <1>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pcie2_reset>, <&pcie30x1m1_0_clkreqn>, <&pcie30x1m1_0_waken>;
|
||
|
|
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie30phy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie3x4 {
|
||
|
|
linux,pci-domain = <0>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pcie3_reset>, <&pcie30x4m1_clkreqn>, <&pcie30x4m1_waken>;
|
||
|
|
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||
|
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pinctrl {
|
||
|
|
fan {
|
||
|
|
fan_int: fan-int {
|
||
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
hym8563 {
|
||
|
|
hym8563_int: hym8563-int {
|
||
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pcie2 {
|
||
|
|
pcie2_reset: pcie2-reset {
|
||
|
|
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pcie3 {
|
||
|
|
pcie3_reset: pcie3-reset {
|
||
|
|
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc3v3_pcie30_en: pcie3-reg {
|
||
|
|
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
rtl8211f {
|
||
|
|
rtl8211f_rst: rtl8211f-rst {
|
||
|
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhci {
|
||
|
|
bus-width = <8>;
|
||
|
|
no-sdio;
|
||
|
|
no-sd;
|
||
|
|
non-removable;
|
||
|
|
mmc-hs400-1_8v;
|
||
|
|
mmc-hs400-enhanced-strobe;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&spi2 {
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||
|
|
num-cs = <1>;
|
||
|
|
|
||
|
|
pmic@0 {
|
||
|
|
compatible = "rockchip,rk806";
|
||
|
|
spi-max-frequency = <1000000>;
|
||
|
|
reg = <0x0>;
|
||
|
|
|
||
|
|
interrupt-parent = <&gpio0>;
|
||
|
|
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||
|
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||
|
|
system-power-controller;
|
||
|
|
|
||
|
|
vcc1-supply = <&vcc5v0_sys>;
|
||
|
|
vcc2-supply = <&vcc5v0_sys>;
|
||
|
|
vcc3-supply = <&vcc5v0_sys>;
|
||
|
|
vcc4-supply = <&vcc5v0_sys>;
|
||
|
|
vcc5-supply = <&vcc5v0_sys>;
|
||
|
|
vcc6-supply = <&vcc5v0_sys>;
|
||
|
|
vcc7-supply = <&vcc5v0_sys>;
|
||
|
|
vcc8-supply = <&vcc5v0_sys>;
|
||
|
|
vcc9-supply = <&vcc5v0_sys>;
|
||
|
|
vcc10-supply = <&vcc5v0_sys>;
|
||
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||
|
|
vcc12-supply = <&vcc5v0_sys>;
|
||
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||
|
|
vcca-supply = <&vcc5v0_sys>;
|
||
|
|
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
|
||
|
|
rk806_dvs1_null: dvs1-null-pins {
|
||
|
|
pins = "gpio_pwrctrl1";
|
||
|
|
function = "pin_fun0";
|
||
|
|
};
|
||
|
|
|
||
|
|
rk806_dvs2_null: dvs2-null-pins {
|
||
|
|
pins = "gpio_pwrctrl2";
|
||
|
|
function = "pin_fun0";
|
||
|
|
};
|
||
|
|
|
||
|
|
rk806_dvs3_null: dvs3-null-pins {
|
||
|
|
pins = "gpio_pwrctrl3";
|
||
|
|
function = "pin_fun0";
|
||
|
|
};
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||
|
|
/*
|
||
|
|
* RK3588's GPU power domain cannot be enabled
|
||
|
|
* without this regulator active, but it
|
||
|
|
* doesn't have to be on when the GPU PD is
|
||
|
|
* disabled. Because the PD binding does not
|
||
|
|
* currently allow us to express this
|
||
|
|
* relationship, we have no choice but to do
|
||
|
|
* this instead:
|
||
|
|
*/
|
||
|
|
regulator-always-on;
|
||
|
|
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <550000>;
|
||
|
|
regulator-max-microvolt = <950000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vdd_gpu_s0";
|
||
|
|
regulator-enable-ramp-delay = <400>;
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <550000>;
|
||
|
|
regulator-max-microvolt = <950000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vdd_cpu_lit_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_log_s0: dcdc-reg3 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <675000>;
|
||
|
|
regulator-max-microvolt = <750000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vdd_log_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <750000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <550000>;
|
||
|
|
regulator-max-microvolt = <950000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vdd_vdenc_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ddr_s0: dcdc-reg5 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <675000>;
|
||
|
|
regulator-max-microvolt = <900000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vdd_ddr_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <850000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd2_ddr_s3: dcdc-reg6 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-name = "vdd2_ddr_s3";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <2000000>;
|
||
|
|
regulator-max-microvolt = <2000000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vdd_2v0_pldo_s3";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <2000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_3v3_s3: dcdc-reg8 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "vcc_3v3_s3";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vddq_ddr_s0: dcdc-reg9 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-name = "vddq_ddr_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_1v8_s3: dcdc-reg10 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-name = "vcc_1v8_s3";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
avcc_1v8_s0: pldo-reg1 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-name = "avcc_1v8_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_1v8_s0: pldo-reg2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-name = "vcc_1v8_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
avdd_1v2_s0: pldo-reg3 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-name = "avdd_1v2_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_3v3_s0: pldo-reg4 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vcc_3v3_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vccio_sd_s0: pldo-reg5 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-name = "vccio_sd_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pldo6_s3: pldo-reg6 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-name = "pldo6_s3";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_0v75_s3: nldo-reg1 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <750000>;
|
||
|
|
regulator-max-microvolt = <750000>;
|
||
|
|
regulator-name = "vdd_0v75_s3";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <750000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ddr_pll_s0: nldo-reg2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <850000>;
|
||
|
|
regulator-max-microvolt = <850000>;
|
||
|
|
regulator-name = "vdd_ddr_pll_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <850000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
avdd_0v75_s0: nldo-reg3 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <750000>;
|
||
|
|
regulator-max-microvolt = <750000>;
|
||
|
|
regulator-name = "avdd_0v75_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_0v85_s0: nldo-reg4 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <850000>;
|
||
|
|
regulator-max-microvolt = <850000>;
|
||
|
|
regulator-name = "vdd_0v85_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_0v75_s0: nldo-reg5 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <750000>;
|
||
|
|
regulator-max-microvolt = <750000>;
|
||
|
|
regulator-name = "vdd_0v75_s0";
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&tsadc {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
pinctrl-0 = <&uart2m0_xfer>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart9 {
|
||
|
|
pinctrl-0 = <&uart9m0_xfer>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* USB 0: USB 2.0 only, OTG-capable */
|
||
|
|
&u2phy0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&u2phy0_otg {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbdp_phy0 {
|
||
|
|
/*
|
||
|
|
* TODO: On the RK1, USBDP0 drives the DisplayPort pins and is not
|
||
|
|
* involved in this USB2-only bus. The bus controller (below) needs to
|
||
|
|
* know that it doesn't have a USB3 port so it can ignore any
|
||
|
|
* USB3-related signals. This is handled in hardware by updating the
|
||
|
|
* GRFs corresponding to that bus controller. Alas, Linux currently
|
||
|
|
* puts the code to do that in the USBDP driver, so USBDP0 must be
|
||
|
|
* enabled for now.
|
||
|
|
*/
|
||
|
|
rockchip,dp-lane-mux = <0 1 2 3>; /* "No USB lanes" */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_host0_xhci {
|
||
|
|
extcon = <&u2phy0>;
|
||
|
|
maximum-speed = "high-speed";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* USB 1: USB 3.0, host only */
|
||
|
|
&u2phy1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&u2phy1_otg {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbdp_phy1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_host1_xhci {
|
||
|
|
dr_mode = "host";
|
||
|
|
extcon = <&u2phy1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* USB 2: USB 2.0, host only */
|
||
|
|
&u2phy2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&u2phy2_host {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_host0_ehci {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_host0_ohci {
|
||
|
|
status = "okay";
|
||
|
|
};
|