227 lines
6.6 KiB
Plaintext
227 lines
6.6 KiB
Plaintext
|
What: /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
Date: January 2024
|
||
|
|
KernelVersion: 6.7
|
||
|
|
Contact: qat-linux@intel.com
|
||
|
|
Description:
|
||
|
|
(WO) This attribute is used to perform an operation on an SLA.
|
||
|
|
The supported operations are: add, update, rm, rm_all, and get.
|
||
|
|
|
||
|
|
Input values must be filled through the associated attribute in
|
||
|
|
this group before a write to this file.
|
||
|
|
If the operation completes successfully, the associated
|
||
|
|
attributes will be updated.
|
||
|
|
The associated attributes are: cir, pir, srv, rp, and id.
|
||
|
|
|
||
|
|
Supported operations:
|
||
|
|
|
||
|
|
* add: Creates a new SLA with the provided inputs from user.
|
||
|
|
* Inputs: cir, pir, srv, and rp
|
||
|
|
* Output: id
|
||
|
|
|
||
|
|
* get: Returns the configuration of the specified SLA in id attribute
|
||
|
|
* Inputs: id
|
||
|
|
* Outputs: cir, pir, srv, and rp
|
||
|
|
|
||
|
|
* update: Updates the SLA with new values set in the following attributes
|
||
|
|
* Inputs: id, cir, and pir
|
||
|
|
|
||
|
|
* rm: Removes the specified SLA in the id attribute.
|
||
|
|
* Inputs: id
|
||
|
|
|
||
|
|
* rm_all: Removes all the configured SLAs.
|
||
|
|
* Inputs: None
|
||
|
|
|
||
|
|
This attribute is only available for qat_4xxx devices.
|
||
|
|
|
||
|
|
What: /sys/bus/pci/devices/<BDF>/qat_rl/rp
|
||
|
|
Date: January 2024
|
||
|
|
KernelVersion: 6.7
|
||
|
|
Contact: qat-linux@intel.com
|
||
|
|
Description:
|
||
|
|
(RW) When read, reports the current assigned ring pairs for the
|
||
|
|
queried SLA.
|
||
|
|
When wrote to, configures the ring pairs associated to a new SLA.
|
||
|
|
|
||
|
|
The value is a 64-bit bit mask and is written/displayed in hex.
|
||
|
|
Each bit of this mask represents a single ring pair i.e.,
|
||
|
|
bit 1 == ring pair id 0; bit 3 == ring pair id 2.
|
||
|
|
|
||
|
|
Selected ring pairs must to be assigned to a single service,
|
||
|
|
i.e. the one provided with the srv attribute. The service
|
||
|
|
assigned to a certain ring pair can be checked by querying
|
||
|
|
the attribute qat/rp2srv.
|
||
|
|
|
||
|
|
The maximum number of ring pairs is 4 per SLA.
|
||
|
|
|
||
|
|
Applicability in sla_op:
|
||
|
|
|
||
|
|
* WRITE: add operation
|
||
|
|
* READ: get operation
|
||
|
|
|
||
|
|
Example usage::
|
||
|
|
|
||
|
|
## Read
|
||
|
|
# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/rp
|
||
|
|
0x5
|
||
|
|
|
||
|
|
## Write
|
||
|
|
# echo 0x5 > /sys/bus/pci/devices/<BDF>/qat_rl/rp
|
||
|
|
|
||
|
|
This attribute is only available for qat_4xxx devices.
|
||
|
|
|
||
|
|
What: /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
Date: January 2024
|
||
|
|
KernelVersion: 6.7
|
||
|
|
Contact: qat-linux@intel.com
|
||
|
|
Description:
|
||
|
|
(RW) If written to, the value is used to retrieve a particular
|
||
|
|
SLA and operate on it.
|
||
|
|
This is valid only for the following operations: update, rm,
|
||
|
|
and get.
|
||
|
|
A read of this attribute is only guaranteed to have correct data
|
||
|
|
after creation of an SLA.
|
||
|
|
|
||
|
|
Applicability in sla_op:
|
||
|
|
|
||
|
|
* WRITE: rm and update operations
|
||
|
|
* READ: add and get operations
|
||
|
|
|
||
|
|
Example usage::
|
||
|
|
|
||
|
|
## Read
|
||
|
|
## Set attributes e.g. cir, pir, srv, etc
|
||
|
|
# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
4
|
||
|
|
|
||
|
|
## Write
|
||
|
|
# echo 7 > /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/rp
|
||
|
|
0x5 ## ring pair ID 0 and ring pair ID 2
|
||
|
|
|
||
|
|
This attribute is only available for qat_4xxx devices.
|
||
|
|
|
||
|
|
What: /sys/bus/pci/devices/<BDF>/qat_rl/cir
|
||
|
|
Date: January 2024
|
||
|
|
KernelVersion: 6.7
|
||
|
|
Contact: qat-linux@intel.com
|
||
|
|
Description:
|
||
|
|
(RW) Committed information rate (CIR). Rate guaranteed to be
|
||
|
|
achieved by a particular SLA. The value is expressed in
|
||
|
|
permille scale, i.e. 1000 refers to the maximum device
|
||
|
|
throughput for a selected service.
|
||
|
|
|
||
|
|
After sending a "get" to sla_op, this will be populated with the
|
||
|
|
CIR for that queried SLA.
|
||
|
|
Write to this file before sending an "add/update" sla_op, to set
|
||
|
|
the SLA to the specified value.
|
||
|
|
|
||
|
|
Applicability in sla_op:
|
||
|
|
|
||
|
|
* WRITE: add and update operations
|
||
|
|
* READ: get operation
|
||
|
|
|
||
|
|
Example usage::
|
||
|
|
|
||
|
|
## Write
|
||
|
|
# echo 500 > /sys/bus/pci/devices/<BDF>/qat_rl/cir
|
||
|
|
# echo "add" /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
|
||
|
|
## Read
|
||
|
|
# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/cir
|
||
|
|
500
|
||
|
|
|
||
|
|
This attribute is only available for qat_4xxx devices.
|
||
|
|
|
||
|
|
What: /sys/bus/pci/devices/<BDF>/qat_rl/pir
|
||
|
|
Date: January 2024
|
||
|
|
KernelVersion: 6.7
|
||
|
|
Contact: qat-linux@intel.com
|
||
|
|
Description:
|
||
|
|
(RW) Peak information rate (PIR). The maximum rate that can be
|
||
|
|
achieved by that particular SLA. An SLA can reach a value
|
||
|
|
between CIR and PIR when the device is not fully utilized by
|
||
|
|
requests from other users (assigned to different SLAs).
|
||
|
|
|
||
|
|
After sending a "get" to sla_op, this will be populated with the
|
||
|
|
PIR for that queried SLA.
|
||
|
|
Write to this file before sending an "add/update" sla_op, to set
|
||
|
|
the SLA to the specified value.
|
||
|
|
|
||
|
|
Applicability in sla_op:
|
||
|
|
|
||
|
|
* WRITE: add and update operations
|
||
|
|
* READ: get operation
|
||
|
|
|
||
|
|
Example usage::
|
||
|
|
|
||
|
|
## Write
|
||
|
|
# echo 750 > /sys/bus/pci/devices/<BDF>/qat_rl/pir
|
||
|
|
# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
|
||
|
|
## Read
|
||
|
|
# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/pir
|
||
|
|
750
|
||
|
|
|
||
|
|
This attribute is only available for qat_4xxx devices.
|
||
|
|
|
||
|
|
What: /sys/bus/pci/devices/<BDF>/qat_rl/srv
|
||
|
|
Date: January 2024
|
||
|
|
KernelVersion: 6.7
|
||
|
|
Contact: qat-linux@intel.com
|
||
|
|
Description:
|
||
|
|
(RW) Service (SRV). Represents the service (sym, asym, dc)
|
||
|
|
associated to an SLA.
|
||
|
|
Can be written to or queried to set/show the SRV type for an SLA.
|
||
|
|
The SRV attribute is used to specify the SRV type before adding
|
||
|
|
an SLA. After an SLA is configured, reports the service
|
||
|
|
associated to that SLA.
|
||
|
|
|
||
|
|
Applicability in sla_op:
|
||
|
|
|
||
|
|
* WRITE: add and update operations
|
||
|
|
* READ: get operation
|
||
|
|
|
||
|
|
Example usage::
|
||
|
|
|
||
|
|
## Write
|
||
|
|
# echo "dc" > /sys/bus/pci/devices/<BDF>/qat_rl/srv
|
||
|
|
# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
4
|
||
|
|
|
||
|
|
## Read
|
||
|
|
# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
|
||
|
|
# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/srv
|
||
|
|
dc
|
||
|
|
|
||
|
|
This attribute is only available for qat_4xxx devices.
|
||
|
|
|
||
|
|
What: /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
|
||
|
|
Date: January 2024
|
||
|
|
KernelVersion: 6.7
|
||
|
|
Contact: qat-linux@intel.com
|
||
|
|
Description:
|
||
|
|
(RW) This file will return the remaining capability for a
|
||
|
|
particular service/sla. This is the remaining value that a new
|
||
|
|
SLA can be set to or a current SLA can be increased with.
|
||
|
|
|
||
|
|
Example usage::
|
||
|
|
|
||
|
|
# echo "asym" > /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
|
||
|
|
250
|
||
|
|
# echo 250 > /sys/bus/pci/devices/<BDF>/qat_rl/cir
|
||
|
|
# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
|
||
|
|
# cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
|
||
|
|
0
|
||
|
|
|
||
|
|
This attribute is only available for qat_4xxx devices.
|